Field Adjustment - Honeywell MT13-520 Manual

2.5 FIELD ADJUSTMENT

There are no field adjustments for the Multinode Module. Each K2LCN board, however,
has a node address jumper-pack that must be characterized for the particular node address it
occupies on the TPLCN. Refer to subsection 8.1 of the LCN System Installation manual
for system pinning.
A replacement power supply must be pinned for internal (INT) clock only (see Figure 2-2).
Figure 2-2 — Power Supply Showing Location of Clock Jumper
Multinode Module Service
(INT)
With Link Clock
E20
E21
2-10
(EXT)
No Link Clock
E23
52389
2.5
9/95