Module And Node Configurations - Honeywell MT13-520 Manual

2.2

2.2 MODULE AND NODE CONFIGURATIONS

Circuit board slots are numbered from 1 to 10 starting at the bottom (nearest the power
supply). When the module is oriented vertically, the slots are numbered from right to left.
Nodes within a single Multinode Module are in a 3/3/2/2 arrangement, with slots 1 through
3 containing the first node, 4 through 6 containing the second node, slots 7 and 8
containing the third node, and slots 9 and 10 containing the fourth node.
The functional control boards are installed in the front card file of the module so that status
indicators on the boards may be viewed through the transparent cover. If an Input/Output
(I/O) adapter board (or paddleboard) is directly associated with a functional control board,
it is installed in the slot behind it in a card file at the rear of the module. Paddleboards
which do not perform an I/O function may also be installed in the rear card file in an unused
slot.
Multinode Module Service 2-2 9/95