Replacement Board Application Notes - Honeywell MT13-520 Manual

Table 2-3 — Multinode Module Board Types (Continued)
Board
Type
CLI I/O Communications Line Interface I/O Card (RS-232C)
CLI/B Comm. Line Interface I/O Card (RS-232C) (EC)
CLI I/O Communications Line Interface I/O Card (RS-449)
CLI/A Comm. Line Interface I/O Card (RS-449) (EC)
PLCI I/O Programmable Logic Controller Interface I/O Card
PLCI I/O Prog. Logic Controllers Interface I/O Card (EC)
NGIO Network Gateway Interface I/O Card
CLCN I/O Local Control Network I/O Card (EC)
Refer to subsection 2.2.3 Replacement Board Application Notes, for information about
compatible replacements.

2.2.4 Replacement Board Application Notes

Table 2-4 lists boards which are dependent upon a minimum software release.
Table 2-4 — Replacement Board Applications
BOARD
TYPE
K2LCN 68020 processor and memory board used in all nodes
EPDG With the EPDGP I/O board, operates the 20" noninterlaced CRT
monitor. The EPDGP I/O also has a Cartridge Disk Interface.
TP485 Paddleboard that interfaces short-distance LCN used in the
Micro TDC 3000, and interfaces the cabinet temperature sensors
(sensors on non-CE Compliant equipment only).
TP485-3 I/O board interfaces the current loop interface between the
I/O modules located in a Micro TDC 3000 tower.
TP485-4 I/O board interfaces the current loop interface between the
I/O modules located in a Micro TDC 3000 tower.
*
All boards are upwards compatible
Multinode Module Service
Description
MINIMUM
DESCRIPTION
.
2-8
2.2.3
(PN 80360209-001)
(PN 51305090-100)
(PN 80360230-001)
(PN 51305091-100)
(PN 51195096-100)
(PN 51195096-200)
(PN 51304472-100)
(PN 51305072-100)
SOFTWARE
RELEASE *
320
320
320
XXX
XXX
9/95