Reviewing Settings For Measurement - GE Everest XLG3 VideoProbe Operating Manual

User Manual

Reviewing Settings for Measurement

For XLG3 systems equipped with measurement capability, these settings determine
system behavior when you are taking measurements. For details, see
Features and Defects"
To Review Settings for Measurement
1. Press
2. Select Setup Menu > Measure.
3. Change any desired settings.
Item
Phase
Stereo
Shadow
Units
Set Min Index
Index Display
User Prompts
on page 87.
.
Description
The Cal Info option displays calibration data for the selected phase tip. All other options
are for factory-authorized personnel only.
The Cal Info option displays calibration data for the selected stereo tip. All other options
are for factory-authorized personnel only.
The Cal Info option displays calibration data for the selected shadow tip. All other
options are for factory-authorized personnel only.
Inches, mm. Determines which units are displayed.
Accuracy index's minimum value. If the index drops below this value, it flashes.
On, off. Determines whether the accuracy index is displayed.
On, off. Determines whether user prompts are displayed in measurement mode.
Only trained professionals should turn these prompts off.
Chapter 4 Setting Up the Software
"Measuring
43