GE Everest XLG3 VideoProbe Operating Manual page 43

User Manual
To Connect the XLG3 System to a Wireless Network
The instructions that follow include both "open" (non-encryption) and WEP and WPA
encryption.
1. Press
2. A checkmark appears next to Automatic.
3. Press
The WiFi Configurations window opens.
4. Select Detect. Please be patient; this may take several minutes.
If the system detects any network access points, they appear now, listed under the
Auto Detect tab
If the system is connected to a network using both an Ethernet connection and a
wireless connection, the system will use the Ethernet connection by default.
Note: The XLG3 supports both wireless B & G.
. Select Setup Menu > Communications > IP Address > Automatic.
. Select Setup Menu > Communications > Wireless Configuration.
Chapter 3 Setting Up and Putting Away the System
The MAC address is the wireless card's
unique identifier.
Any detected access points appear here.
35