Frequent Tasks - GE Everest XLG3 VideoProbe Operating Manual

User Manual

Frequent Tasks

Setting Up the System — Summary
For details, see
1. Open case's lids and front door.
2. Verify safe powering and grounding.
Inspect ground prong on power cord.
3. Connect to AC power, or attach battery.
4. Turn on power switch.
5. Remove insertion tube from storage reel.
6. Unwrap handset cable, and remove handset from case.
7. Install optical tip, accessories, and peripheral devices.
Capturing Images — Summary
For details, see
1. Steer probe until desired view is displayed.
Position camera by moving joystick toward desired feature.
2. Freeze the image.
When desired image is displayed, press
3. Save the image.
Press
Recording Video — Summary
For details, see
1. Start recording video.
Press
2. Stop recording video.
Press
Putting the System Away — Summary
For details, see
1. Straighten bending neck.
2. Turn off system, and disconnect from power source.
3. Detach peripheral devices and accessories.
4. Return insertion tube to storage reel, and wrap handset cable.
5. Store system and components in case.
"Setting Up the System"
"Capturing Images and Videos"
. Select Return. The image is saved.
"Working With Videos"
. Select Start Recording.
. Select Video Record > Stop Recording.
"Putting the System Away"
on page 27.
on page 47.
.
on page 67.
on page 32.
Chapter 1 Introduction 3