Controls, Indicators, Connectors, Etc - GE Everest XLG3 VideoProbe Operating Manual

User Manual

Controls, Indicators, Connectors, etc.

This section describes the controls, indicators, connectors, and other key elements for
each main system component:
• "Handset"
• "Control Buttons"
• "Probe"
• "Base Unit"
• "Case"
Handset
The handset is your interface to the XLG3 system.
Item
A. Microphone
B. Display
C. Control buttons
D. Shoulder-strap loops
E. Handset cable
F. Flashlight LEDs
G. Electrical connector
H. Fiberoptic connector
I. Trigger
on page 7
on page 8
on page 9
on page 10
on page 14
A. Microphone
B. Display
C. Control
buttons
D. Shoulder-strap
loops
E. Handset cable
Description
Lets you record voice comments for video or still images.
Large, bright, high-resolution wide-VGA LCD screen.
For details, see "Control Buttons"
Strap is an optional accessory.
Plugs into the base unit. Powers the handset, enables communication with the base unit,
and conducts light via a fiberoptic bundle from the lamp to the handset.
Provide light for reading or writing. See
Enables communication between base unit, handset, and probe.
Couples light to the probe.
Same functions as the freeze/enter button
Chapter 1 Introduction
on page 8.
"To Turn the Flashlight On and Off"
(item B. on page 8).
7
F. Flashlight LEDs
G. Electrical
connector
H. Fiberoptic
connector
I. Trigger
on page 29.