Chapter 6 Installing The Free-Standing Reflector Wall Structure - Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual

6
C H A P T E R
Installing the Free-Standing Reflector Wall
Structure
Revised: May 20, 2015, OL-27038-01
This chapter describes the tasks you perform to mount a free-standing reflector wall.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Caution Cisco recommends that you wear safety gloves and safety glasses when installing the system.
Note The directions left and right refer to the assembly as you face the displays.
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
6-1
OL-27038-01