Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 333

Chapter 14 Completing Installation of the Main Display Structure
e.
Note
f.
Note
Figure 14-18
Note
Key Part Description
1
Lower facade panel, right
2
Lower facade panel, left
3
Guide pin holes
4 Studs
OL-27038-01
Install the rear left and right lower rear facade panels to the system assembly.
The panels have studs and guide pins.
Align the studs (callout 4 in
•
installed in Step 9. c.
Do not insert the nuts on the threaded studs until
Align the guide pins (callout 3 in
•
Press the ball studs in the top of the panels to the display structure to secure the assembly.
The bottom section is held by magnets.
shows the structure from the rear. Left and right are reversed.
Part Number
700-37426-01
Kit # 69-2325-01
700-37425-01
Kit # 69-2325-01
N/A
N/A
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Figure 14-18) to the slots of the facade attachment plate that you
Step 9 i.
Figure 14-19) to the holes that are shown in
Qty Ctn Notes
1 3
1 3
N/A Part of facade panels and shown in
N/A Part of facade panels and shown in
Figure 14-19.
Figure 14-19.
Figure 14-18.
14-19