Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 172

Labeling the Display Frame and Cable Runner
Table 10-2
Icon
Apply labels to the display frame pieces and the cable runner. This is to ensure that cables are routed
through the correct channels. Use
the front of the display frame, and
Apply labels to the cable runner as shown in
route the cables using this guide.
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
10-4
Cable Icons
Description
Display cables
Microphone cables
Presentation cables
Light cables
Speaker cables
Figure 10-13
Figure 10-14
Chapter 10
as a reference to determine where to apply the labels to
for the rear of the display frame.
Figure 10-3. Be sure that, when you cable the system, you
Connecting and Routing the Cables
OL-27038-01