Cisco Catalyst 9600 Series Installation Note page 8

Safety Warnings
Warning
AC connected units must have a permanent ground connection in addition to the power cable ground wire.
NEBS-compliant grounding satisfies this requirement. Statement 284
Warning High leakage current—earth connection essential before connecting to system power supply. Statement 342
Warning Power Cable and AC Adapter - When installing the product, please use the provided or designated connection
cables/power cables/AC adaptors.Using any other cables/adaptors could cause a malfunction or a fire. Electrical
Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the "UL or CSA" shown
on the code) for any other electrical devices than products designated by CISCO. The use of cables that are
certified by Electrical Appliance and Material Safety Law (that have "PSE" shown on the code) is not limited
to CISCO-designated products. Statement 371
Warning To reduce the risk of electric shock, the chassis of this equipment needs to be connected to permanent earth
ground during normal use. Statement 0445
Warning
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Warning Class 1 laser product. Statement 1008
Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's
instructions. Statement 1015
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available. Statement 1024
Cisco Catalyst 9600 Series Line Card Installation Note
8