Cisco Catalyst 9600 Series Installation Note page 4

Cisco Catalyst 9600 Series 48-Port 25 G/10 G/1 G (C9600-LC-48YL)
Figure 2: 40 G/1 G Port Numbering on C9600-LC-24C
Figure 3: 100 G Port Numbering on C9600-LC-24C
By default, all the interfaces on a C9600-LC-24C are 40 G/1 G enabled. The default 40 G/1 G interfaces can
be configured to function as 100 G ports using the CLI. However, from each port group, only the odd numbered
ports can be configured with 100 G speed; the even numbered ports in a port group are disabled.
Figure 4: 40 G/1 G (Default) Configuration on C9600-LC-24C
Figure 5: 100 G Configuration on C9600-LC-24C
Cisco Catalyst 9600 Series 48-Port 25 G/10 G/1 G (C9600-LC-48YL)
The following figure shows the front view of a 48-port 25 G/10 G/1 G (C9600-LC-48YL) with the major
features identified.
Cisco Catalyst 9600 Series Line Card Installation Note
4