No Buzzer Sound After Installing The Batteries - GE SEER Light Service Manual

No Buzzer Sound After Installing the Batteries

2-6
SEER Light/SEER Light Extend Recorder: Troubleshooting
No buzzer sound after
installing the batteries.
Are the batteries
installed properly?
Yes
Are the batteries
new?
Yes
Were the batteries
reinstalled over 10
seconds after the
batteries were
removed?
Yes
Are the battery
electrodes clean and
properly soldered?
Yes
Call GE service.
SEER Light Ambulatory Recorder/Controller
2019818-008
No
Install the batteries
properly.
No
Replace with new
batteries.
No
Reinstall the batteries
over 10 seconds after
removing them.
No
Call GE service.
Revision B