Page 1
User Manual Orbi Pro WiFi 6 AX6000 Tri-band WiFi System Models Orbi Pro WiFi 6 Router Model SXR80 Orbi Pro WiFi 6 Satellite Model SXS80 NETGEAR, Inc. May 2021 350 E. Plumeria Drive 202-12117-02 San Jose, CA 95134, USA...
Page 2
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Revision History Publication Part Publish Date Comments Number 202-12117-02 May 2021 We reorganized the manual and placed the sections for WiFi features in a separate chapter.
Page 4
Add-on Orbi Pro WiFi 6 satellite LEDs........13 Wall mount your Orbi Pro WiFi 6............14 Orbi Pro WiFi 6 router label and Orbi Pro Wifi 6 satellite label..17 Connect your Orbi Pro WiFi 6 router..........18 Place your Orbi Pro WiFi 6 satellite..........19 Sync your Orbi Pro WiFi 6 satellite...........19...
Page 5
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Manage an IPv6 Internet connection..........35 Requirements for entering IPv6 addresses.........35 Specify IPv6 Internet connections..........35 Use auto detection for an IPv6 Internet connection....36 Use auto configuration for an IPv6 Internet connection...37 Set up an IPv6 6to4 tunnel Internet connection......39...
Page 6
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Set up a guest WiFi network and captive portal......83 Set up a guest WiFi network with open access or password authentication.................84 Set up Facebook Wi-Fi..............85 Set up a guest network with a captive portal......87...
Page 7
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Delete a reserved IP address entry..........122 Manage custom static routes............122 Set up a static route..............123 Change a static route..............124 Delete a static route..............125 Improve network connections with Universal Plug and Play..125 Manage the VLANs and port modes..........127...
Page 8
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Erase the current configuration settings........156 Restore configuration settings...........157 Set up remote management............158 Use remote access................159 Use the router as a WiFi access point..........159 Set up router mode................161 Chapter 8 Customize Internet Traffic Rules for Ports Manage port forwarding to a local server........163...
Page 9
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Troubleshoot PPPoE................188 Troubleshoot WiFi connectivity............189 Troubleshoot your network using the ping utility......189 Test the LAN path to your router..........190 Test the path from your computer to a remote device...190 Appendix A Supplemental Information Factory settings.................193...
The Orbi Pro WiFi 6 AX6000 Tri-band WiFi System creates dedicated high-speed WiFi connections to your Internet service. The Orbi Pro WiFi 6 router connects to your modem or gateway. The Orbi Pro WiFi 6 satellite extends the WiFi signal throughout your business, office, or home.
• Orbi Pro WiFi 6 Satellite (Model SXS80) Note: To manage your Orbi Pro WiFi 6 router and any Orbi Pro WiFi 6 satellites that are connected to your Orbi Pro WiFi 6 network, you must manage them from your Orbi Pro WiFi 6 router web interface.
7. DC Power connector LED behavior When you sync an Orbi Pro WiFi 6 satellite to the Orbi Pro WiFi 6 router, the LED behavior for a satellite that comes in an Orbi Pro WiFi 6 system is different from the LED behavior for add-on Orbi Pro WiFi 6 satellites.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Orbi Pro WiFi 6 System LEDs The following table describes the LED behavior for an Orbi Pro WiFi 6 router (model SXR80) and Orbi Pro Wifi 6 satellite (model SXS80) that are purchased together and come in the same package.
Your package contains wall-mounting items. Before you can wall mount your Orbi Pro WiFi 6 router (model SXR80) or Orbi Pro WiFi 6 satellite (model SXS80), you must attach the mount base to your router or satellite, and the mount brackets to the wall.
Page 15
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To wall mount your router or satellite: 1. Lift the mount base vertically so it slides free of the mount bracket. 2. Locate the two mounting holes on the mounting bracket.
Page 16
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. Place your Orbi router or satellite on the mount base and attach it to the base with the provided screws. 7. Attach the mount cover to the mount base.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 9. Slide the mount base onto the wall bracket. Orbi Pro WiFi 6 router label and Orbi Pro Wifi 6 satellite label The Orbi Pro Wifi 6 router label shows the login information, the WiFi network name and password, the router’s MAC address, and the router’s serial number.
Figure 4. Orbi Pro WiFi 6 satellite label Connect your Orbi Pro WiFi 6 router If you want to connect your Orbi Pro WiFi 6 router to an existing gateway, we recommend that you turn off your existing gateway’s WiFi.
Sync a satellite from an Orbi Pro WiFi 6 system The Orbi Pro WiFi 6 System includes an Orbi Pro WiFi 6 router and a Orbi Pro WiFi 6 satellite. The Orbi Pro WiFi 6 satellite that is packaged with an Orbi Pro WiFi 6 router is preset to automatically find and sync to the router’s WiFi signal.
Step 2 of this procedure and then turns off. Sync an add-on Orbi Pro WiFi 6 satellite If you already set up an Orbi Pro WiFi 6 router and satellite and are you adding an optional add-on Orbi Pro WiFi 6 satellite (sold separately), follow these steps.
Add satellites to your network using the router web interface You can use the Orbi Pro WiFi 6 router web interface to add a satellite to your Orbi network. To add a satellite to your Orbi network using the router web interface: 1.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The satellite’s bar LED pulses white. 10. Click the SYNC button in the router web interface. The router attempts to sync with the satellite. The satellite’s bar LED lights one of the following colors for about three minutes and then turns off: •...
Page 23
Connect to the Orbi Pro WiFi 6 Network and Access the Router To manage your Orbi Pro WiFi 6 router and any Orbi Pro WiFi 6 satellites that are connected to your Orbi Pro Wifi 6 network, you must manage them from your Orbi Pro WiFi 6 router web interface.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Connect to the network for initial configuration You can connect to the Orbi network through a wired or WiFi connection. Note: If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP).
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 WiFi connection using WPS You can connect to the router’s WiFi network with Wi-Fi Protected Setup (WPS) or you can find and select the WiFi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Use the interactive Internet setup process Before you start the interactive Internet setup process, get your ISP information and make sure that the computers and devices in the network use the settings described here.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your browser does not display the web page Your router does not connect to the Internet Make sure that the computer is connected to the router Review your settings.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Change the language By default, the language is set as Auto. To change the language: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 29
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 • Mozilla Firefox: If Mozilla Firefox displays a Your connection is not secure warning, click the ADVANCED button. Then, click the Add Exception button. In the pop-up window that displays, click the Confirm Security Exception button.
Specify Your Internet Settings Usually, the quickest way to set up the router to use your Internet connection is to allow Orbi to detect the Internet connection when you first access the router with a web browser. You can also customize or specify your Internet settings. This chapter contains the following sections: •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Use the Internet Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your router. To use the Setup Wizard: 1.
Page 32
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 A login window displays. If your browser does not display a login window but displays a security warning and does not let you proceed, see Resolve a browser security warning on page 28.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 10. Select a Router MAC Address radio button: • Use Default Address: Use the default MAC address. • Use Computer MAC Address: The router captures and uses the MAC address of the computer that you are now using.
Page 34
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 9. If your ISP requires a service name, type it in the Service Name (if Required) field. 10. From the Connection Mode menu, select Always On, Dial on Demand, or Manually Connect.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Manage an IPv6 Internet connection The router supports many different types of IPv6 Internet connections for which you can specify the settings manually. Requirements for entering IPv6 addresses IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your Internet service provider (ISP) can provide this information. For more information about IPv6 Internet connection, see the following sections: • Use auto detection for an IPv6 Internet connection on page 36 •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The router automatically detects the information in the following fields: • Connection Type: This field indicates the connection type that is detected. • Router’s IPv6 Address on WAN: This field shows the IPv6 address that is acquired for the router’s WAN (or Internet) interface.
Page 38
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If your browser does not display a login window but displays a security warning and does not let you proceed, see Resolve a browser security warning on page 28.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 9. In the LAN Setup section, select an IP Address Assignment radio button: • Use DHCP Server: This method passes more information to LAN devices, but some IPv6 systems might not support the DHCPv6 client function.
Page 40
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. From the Internet Connection Type menu, select 6to4 Tunnel. The page adjusts. The router automatically detects the information in the Router’s IPv6 Address on LAN field.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your settings are saved. Set up an IPv6 6rd tunnel Internet connection The 6rd protocol makes it possible to deploy IPv6 to sites using a service provider’s IPv4 network.
Page 42
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The router can automatically detect the information in the following sections: • 6rd (IPv6 Rapid Deployment) Configuration: The router detects the service provider’s IPv4 network and attempts to establish an IPv6 6rd Tunnel connection.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your settings are saved. Set up an IPv6 pass-through Internet connection In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and WAN Ethernet ports) for IPv6 packets.
Page 44
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 9. Select an IPv6 Filtering radio button: • Secured: In secured mode, which is the default mode, the router inspects both TCP and UDP packets.
Page 46
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Most people can leave this field blank, but if your ISP gave you a specific host name, enter it here. 7. (Optional) In the Domain Name (If Required) field, enter a domain name.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Set up an IPv6 PPPoE Internet connection To set up a PPPoE IPv6 Internet connection: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 48
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 • Password. Enter the password for the ISP connection. • Service Name (if Required). Enter a service name. If your ISP did not provide a service name, leave this field blank.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Change the MTU size The maximum transmission unit (MTU) is the largest data packet a network device transmits. When one network device communicates across the Internet with another, the data packets travel through many devices along the way.
Page 50
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 4. Select ADVANCED > Setup > WAN Setup. The WAN Setup page displays. 5. In the MTU Size field, enter a value from 64 to 1500.
Control Access to the Internet The router comes with a built-in firewall that helps protect your business network from unwanted intrusions from the Internet. This chapter includes the following sections: • Manage MAC access control lists for WiFi networks and the LAN •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Manage MAC access control lists for WiFi networks and the LAN A MAC access control list (ACL) for a WiFi network (that is, an SSID) or the wired network (that is, the LAN) allows or denies a device access to the network based only on the MAC address of the device.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Enable a MAC ACL for a specific network When you enable a MAC ACL for a specific network, you must specify the default policy for that network. The default policy determines whether devices that you add to the MAC ACL are allowed or denied access to that specific network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 You can now add and manage devices on the MAC ACL. For more information, see the following sections: • Add automatically detected devices to a MAC ACL on page 54 •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The devices are added to the MAC ACL on the MAC ACL page. Devices on the MAC ACL are an exception to the default policy: •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The device is added to the MAC ACL on the MAC ACL page. Devices on the MAC ACL are an exception to the default policy: •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The BASIC Home page displays. 4. Select ADVANCED > Security > MAC ACL. The MAC ACL page displays. 5. Go to the section for the network for which you want to disable the MAC ACL.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Note: Each network device owns a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 0–9, a–f, or A–F (uppercase or lowercase) only, and separated by colons (for example, 00:09:AB:CD:EF:01).
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. Click the Apply button. Your settings are saved. 7. Select an access rule for new devices: • Allow all new devices to connect: With this setting, if you add a new device, it can access the Orbi network.
Page 60
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Manage the blocked devices on the network access control list If you set up an access list that allows all new devices to access the Orbi network but you want to block some devices from accessing the Orbi network, you must specify the devices that you want to block.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 7. To remove a device from the blocked list, do the following: a. Select the check box for the device. b. Click the REMOVE FROM THE LIST button.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. Select a keyword blocking option: • Per Schedule: To block the keywords based on a schedule, select the Per Schedule radio button. For information about how to set the schedule, see Schedule when to block Internet sites and services on page 66.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The Block Sites page displays. 5. Do one of the following: • To delete a single word, select it and click the Delete Keyword button.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Block services from the Internet You can block Internet services on your network based on the type of service. You can block the services all the time or based on a schedule.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 8. To add a service or application that is not the list, select User Defined. a. If you know that the application uses either TCP or UDP, select the appropriate protocol.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If your browser does not display a login window but displays a security warning and does not let you proceed, see Resolve a browser security warning on page 28.
Page 68
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The E-mail page displays. 5. Select the Turn Email Notification On check box. 6. In the Primary E-mail Address field, enter the email address to which logs and alerts are sent.
Manage the WiFi Settings This chapter includes the following sections: • Change the admin WiFi network settings • Manage the employee WiFi network settings • Manage the IoT WiFi network settings • Set up a guest WiFi network and captive portal •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Change the admin WiFi network settings You can set up four WiFi networks for your Orbi Pro WiFi 6 network: one for administrative access, one for employee access, one for Internet of things (IoT) devices, and one for guest access.
Page 71
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. To change the admin network name (SSID), type a new name in the Name (SSID) field. The name can be up to 32 characters long and it is case-sensitive. If you did not change the SSID during the setup process, the default SSID is shown.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Change the admin WiFi password or security level We recommend that you do not disable security for your WiFi network. Note: The router web interface calls the admin WiFi network the Wireless 1 network.
Page 73
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 When you select this option, the Password (Network Key) field displays. Do the following: a. In the Password (Network Key) field, enter the network key (password) that you want to use.
Your settings are saved. Manage the employee WiFi network settings You can set up four WiFi networks for your Orbi Pro WiFi 6 network: one for administrative access, one for employee access, one for Internet of things (IoT) devices, and one for guest access.
Page 75
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 When employee devices connect to the employee WiFi network, they cannot see other devices that are connected to the network and cannot access the local area network (LAN).
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 9. To change the VLAN profile, select the VLAN Profile check box, and select a VLAN profile from the menu. By default, the VLAN profile is set to Employee(20) for the Wireless 2 network.
Page 77
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. Under Security Options, select a WiFi security option: • WPA2-PSK [AES]: The WPA2 option uses AES encryption. This type of security allows only WiFi devices that support WPA2 or WPA3 to join the network.
Page 78
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 This password must be configured on the RADIUS server. This password is used to authenticate the router (not a WiFi client) against the RADIUS server.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Manage the IoT WiFi network settings You can set up four WiFi networks for your Orbi Pro WiFi 6 network: one for administrative access, one for employee access, one for Internet of things (IoT) devices, and one for guest access.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 By default, the broadcast is enabled. 7. To separate the single SSID for the Wireless 3 network in an SSID for the 2.4 GHz band and another SSID for the 5 GHz band, select the Enable SSID separation for 2.4G/5GHz check box.
Page 81
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To change the IoT WiFi network password or WPA settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Page 82
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 • WPA2 Enterprise: If your network is connected to a RADIUS server that can provide authentication and your network includes WPA2 and WPA3 devices, select this radio button. WPA2 Enterprise can provide a high level of security and allows WPA2 and WPA3 devices to connect to the network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 When you select this option, additional fields display so that you can specify the RADIUS server. Do the following: a. In the IP address field, enter the IP address of the RADIUS server to which the router must connect.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Set up a guest WiFi network with open access or password authentication A guest WiFi network is also referred to as a guest portal. To set up a guest network with open access or password authentication: 1.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 9. Scroll down to the Authentication Options section and either specify an open network or set an authentication password by doing one of the following: •...
Page 86
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If you enable this option, users can either check in to the selected Facebook business page or skip the check-in. • Require Wi-Fi code. To require users to enter a WiFi code before they can gain WiFi access, select the Require Wi-Fi code radio button and type a WiFi code in the field that displays.
Page 88
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Your settings are saved. Manage the download bandwidth per SSID You can set up four WiFi networks for your Orbi Pro WiFi 6 network: one for administrative access, one for employee access, one for Internet of things (IoT) devices, and one for guest access. You can manage the download bandwidth per WiFi network (SSID) by assigning a percentage of the total bandwidth (100 percent) to each SSID.
Page 90
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To set the download bandwidth ratios for the SSIDs: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your settings are saved. The router sends the new settings to the satellite. Manage the advanced WiFi settings Depending on the advanced WiFi setting, the setting applies either to all WiFi networks on a radio or to all WiFi networks on the router.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your settings are saved. The router restarts with the settings for the new region. Enable or disable SSID broadcast for a radio By default, the router broadcasts its WiFi network names (SSIDs) so that WiFi clients can detect them in their scanned network lists.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 20/40 MHz coexistence to increase the WiFi speed on the 2.4 GHz radio to the maximum supported speed for the WiFi mode. 20/40 MHz coexistence does not apply to the 5 GHz radio.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Note: We recommend that you do not disable the WMM settings. If you disable the WMM settings for a radio, the maximum link rate that your router can reach on the radio is 54 Mbps.
Page 95
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To change the CTS/RTS threshold and preamble mode for a radio: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Change the transmission output power for a radio By default, the transmission output power of the router is set at the maximum. If two or more WiFi routers, access points, WiFi gateways, or combination of these WiFi devices are operating in the same area and on the same channel, interference can occur.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To generate a new backhaul password: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Wireless Settings. The Advanced Wireless Settings page displays. 5. Select or clear the Enable MU-MIMO check box.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Enable or disable Protected Management Frames Protected Management Frames (PMF), according to the 802.11w standard, is a security feature that protects unicast and multicast management frames from being intercepted and changed for malicious purposes.
Manage the LAN and WAN Settings This chapter includes the following sections: • View or change WAN settings • Change the WAN port speed • Manage Dynamic DNS • Set up a default DMZ server • Manage the LANs • Use the router as a DHCP server •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 View or change WAN settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 proxying is disabled. If you clear the check box, IGMP proxying is enabled and you can select which type of IGMP messages are forwarded by the router: Auto: The router automatically detects the supported protocol (IGMPv3 or IGMPv2) and forwards the message accordingly.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 satellite's LAN port 1 to the router's WAN port 1 to have a Ethernet backhaul speed of 2.5 Gbps. To change the WAN port speed: 1.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 you must set up the router to use Dynamic DNS. Then the router notifies the Dynamic DNS service provider whenever its IP address changes. When you access your Dynamic DNS account, the service finds the current IP address of your business network and automatically connects you.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 13. Follow the onscreen instructions to register for your NETGEAR Dynamic DNS service. 14. To check that Dynamic DNS is enabled in the router, click the Show Status button.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 11. Click the Apply button. Your settings are saved. 12. To verify that your Dynamic DNS service is enabled in the router, click the Show Status button.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 DMZ servers pose a security risk. A computer designated as the default DMZ server loses much of the protection of the firewall and is exposed to exploits from the Internet.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 • LAN 3: Preset to the IoT VLAN profile with ID 30. • LAN 4: Preset to the Guest VLAN profile with ID 40. • LAN 5: You can set a custom VLAN profile for this LAN.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. In the IP Subnet Mask, type the subnet mask of the router. The IP address and subnet mask identifies which addresses are local to a specific device and which must be reached through a gateway or router.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 A login window displays. If your browser does not display a login window but displays a security warning and does not let you proceed, see Resolve a browser security warning on page 28.
Page 111
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To change the IoT LAN settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Change the guest LAN 4 settings By default, LAN 4 is assigned to the Guest VLAN profile with ID 40. The default IP address of LAN 4 is 192.168.40.1.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Set custom settings for LAN 5 You can set a custom VLAN profile for LAN 5. To set up LAN 5: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Use the router as a DHCP server You can set a Dynamic Host Configuration Protocol (DHCP) server for each LAN. By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 7. Click the Apply button. Your settings are saved. The router delivers the following parameters to any LAN device that requests DHCP: • An IP address from the range that you defined •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 This IP address must be in the same subnet as the router. The default ending IP address is 192.168.20.254. 7. Click the Apply button. Your settings are saved.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. Specify the range of IP addresses that the router assigns: a. In the Starting IP Address field, enter the lowest number in the range.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. If you previously disabled the DHCP server feature, select the Use Router as DHCP Server check box. 6. Specify the range of IP addresses that the router assigns: a.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 4. Select ADVANCED > Setup > LAN Setup > LAN 5. The LAN Setup page displays. 5. If you previously disabled the DHCP server feature, select the Use Router as DHCP Server check box.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. In the Address Reservation section of the page, click the Add button. 7. In the IP Address field, type the IP address to assign to the computer or server.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 8. Change the settings. 9. Click the Apply button. Your settings are saved. Delete a reserved IP address entry To delete a reserved address entry: 1.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 As an example of when a static route is needed, consider the following case: • Your main Internet access is through a cable modem to an ISP.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The page adjusts. 6. In the Route Name field, type a name for this static route (for identification purposes only.) 7. To limit access to the LAN only, select the Private check box.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. In the table, select the radio button for the route. 6. Click the Edit button. The Static Routes page adjusts. 7. Edit the route information.
Page 126
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time communications such as instant messaging or remote assistance, enable UPnP. To enable Universal Plug and Play: 1.
Guest Portal LAN 5 (disabled) The Orbi Pro WiFi 6 also lets you set port modes. By default, all Ethernet ports are assigned Trunk mode but you can also select Access mode for a port. Change the port mode to Trunk mode or Access mode By default, all Ethernet ports (that is, the WAN port and the LAN ports) are assigned Trunk mode.
Page 128
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Use the following guidelines: • Default VLAN profile. For ports that are assigned to the Default VLAN profile, no difference exists between Trunk mode and Access mode. You can connect a modem, gateway, client device, or end device to a port that is assigned to the Default VLAN profile.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. In either the Base (router) or Satellite section, for the Ethernet port that you want to change, select Access or Trunk from the Mode menu.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Field Description Name Enter a name for the VLAN. VLAN ID Enter an ID from 1 to 4094. Client Isolation Client isolation prevents hosts and clients in the VLAN from reaching ports, hosts, and clients in the same VLAN, thereby increasing security.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. The LAN Setup page for LAN 1 displays. 5. Select the tab (LAN 2, LAN 3, LAN 4, or LAN 5) for the LAN for which you want to add a new VLAN profile.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Note the following: • If two LAN ports form a link aggregation group (LAG), they must be assigned to the same VLAN profile. • You can assign the WAN port to any VLAN profile.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 • If an Ethernet port and a LAN are assigned to same VLAN profile, you cannot change the VLAN profile for the LAN until you assign the Ethernet port to a different VLAN profile.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If your browser does not display a login window but displays a security warning and does not let you proceed, see Resolve a browser security warning on page 28.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The VLAN / Bridge Settings page displays. 5. Select the radio button next to the VLAN you want to delete. 6. Click the DELETE button.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If your browser does not display a login window but displays a security warning and does not let you proceed, see Resolve a browser security warning on page 28.
Page 137
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings. The VLAN / Bridge Settings page displays. For the router (base) and each satellite, the ports display on the page. The ports that are connected are outlined in blue.
Manage and Monitor Your Orbi Pro System This chapter describes the router settings for administering, maintaining, and monitoring your Orbi Pro system The chapter includes the following sections: • Update the router and satellite firmware • Change the admin password •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Update the router and satellite firmware You can use the router web interface to check if new firmware is available and update your router and satellite, or you can manually update the firmware for your router and satellite.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 For more information, see Manually update router firmware on page 142. Manually update satellite firmware We recommend that you update your satellite’s firmware before you update the router’s firmware.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The firmware on your Orbi satellite is updated. Manually update router firmware We recommend that you update your router’s firmware after you update the satellite’s firmware.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Note: Be sure to change the password for the user name admin to a secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 A login window opens. 8. With your new admin password, log in to the router. View router status and usage information To view router status and usage information: 1.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The Show Statistics window opens and displays following information: • System Up Time: The time elapsed since the router was last restarted. • Port: The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the page displays the following information: Status: The link status of the port.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. In the Internet Port pane, click the Connection Status button. The Connection Status window opens and displays the following information • IP Address: The IP address that is assigned to the router.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your Internet’s download and upload speeds display. View satellites, WiFi devices, and wired devices connected to the Orbi network You can view all satellites, WiFi devices, and wired devices that are connected to your Orbi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 • Association Time: The period in hours, minutes, and seconds that the device is connected to the WiFi network. • Link Status: The quality and strength in dBm of the WiFi connection of the device.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The satellite status displays. The page displays information about the satellite connections, hardware and firmware versions, and the WiFi networks in the 2.4 GHz and 5 GHz bands.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. To manage the actions that the router logs, check or clear the check boxes for the following actions: • Attempted access to allowed sites: Selected by default.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 5. At the bottom of the page, in the Syslog Server section, select the Enable Syslog radio button. The Syslog fields become available. 6. Specify the IP address and port number for the syslog server: •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. To control the volume of Internet traffic, use either the traffic volume control feature or the connection time control feature: • Select the Traffic volume control by radio button and then select one of the following options: No Limit: No restriction is applied when the traffic limit is reached.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To change the NTP server to your preferred NTP server: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. If you live in a region that observes daylight saving time, select the Automatically adjust for daylight savings time check box. 7. Click the Apply button.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To manage the automatic backup options: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Set up remote management You can access your router over the Internet to view or change its settings. You must know the router’s WAN IP address to use this feature. For information about Dynamic DNS, see Manage Dynamic DNS on page 103.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Select one of the following: • To allow access from a single IP address on the Internet, select the Only This Computer radio button. Enter the IP address to be allowed access.
Page 160
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To set up the Orbi router as an AP after you set up your Internet connection: 1. Use an Ethernet cable to connect the Internet port of this router to a LAN port on your existing router or gateway.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Set up router mode If you set up your Orbi Pro router as an access point, you can change it back to a router. To set up the Orbi Pro router as a router: 1.
Customize Internet Traffic Rules for Ports You can use port forwarding and port triggering to set up rules for Internet traffic. You need networking knowledge to set up these features. This chapter includes the following sections: • Manage port forwarding to a local server •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Manage port forwarding to a local server If your business network includes a server, you can allow certain types of incoming traffic to reach the server. For example, you might want to make a local web server, FTP server, or game server visible and available to the Internet.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 9. In the Server IP Address field, enter the IP address of the computer that will provide the service. 10. Click the Add button. The service displays in the list.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 12. Type the IP address in the Internal IP address fields or select the radio button for an attached device listed in the table. 13. Click the Apply button.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Your settings are saved. Delete a port forwarding entry To delete a port forwarding entry: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Dynamic DNS makes it much easier to access a server from the Internet because you can type the name in the Internet browser. Otherwise, you must know the IP address that the ISP assigned, which typically changes.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Add a port triggering service To add a port triggering service: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 The service is now in the Portmap Table. You must enable port triggering before the router used port triggering for the service that you added. See Enable port triggering on page 169.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Application example: Port triggering for Internet Relay Chat Some application servers, such as FTP and IRC servers, send replies to multiple port numbers. Using port triggering, you can tell the router to open more incoming ports when a particular outgoing port starts a session.
Use VPN to Access Your Network You can use OpenVPN software to remotely access your router using virtual private networking (VPN). This chapter explains how to set up and use VPN access. This chapter includes the following sections: • Set up a VPN connection •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Set up a VPN connection A virtual private network (VPN) lets you use the Internet to securely access your network when you are away from your business.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 By default, the VPN uses the UDP service type and uses port 12974. If you want to customize the service type and port, we recommend that you change these settings before you install the OpenVPN software.
Page 174
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. Specify any VPN service settings on the page. For more information, see Specify VPN service in the router on page 172. 7. Click the For Windows button to download the OpenVPN configuration files.
Page 175
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 14. To specify the destination folder, click the Browse button and select a destination folder. 15. Click the Install button. The window displays the progress of the installation and then displays the final installation page.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If you do not change the VPN interface name, the VPN tunnel connection will fail. For more information about using OpenVPN on your Windows-based computer, visit https://openvpn.net/index.php/open-source/documentation/howto.html#quick.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Install OpenVPN software on an iOS device You must install this software on each iOS device that you plan to use for VPN connections to your router.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Install OpenVPN software on an Android device You must install this software on each Android device that you plan to use for VPN connections to your router.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Use a VPN tunnel on your Windows-based computer After you set up the router to use VPN and install the OpenVPN application on your computer, you can open a VPN tunnel from your computer to your router over the Internet.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 3. Select Connect. The VPN connection is established. You can launch a web browser and log in to your router. Use VPN to access your Internet service at...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 If your browser does not display a login window but displays a security warning and does not let you proceed, see Resolve a browser security warning on page 28.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
This chapter provides information to help you diagnose and solve problems you might experience with your Orbi router or satellite. If you do not find the solution here, check the NETGEAR support site at support.netgear.com for product and contact information. This chapter includes the following sections: •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Quick tips This section describes tips for troubleshooting some common problems. Sequence to restart your network When you restart your network, follow this sequence: 1. Turn off and unplug the modem.
Page 185
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To sync the router and the satellite: 1. Place the satellite in the same room as the Orbi Prorouter. Use this satellite location only during the sync process.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 10. If the satellite’s bar LED lights magenta, the satellite did not resync with the router. If they successfully synced when they were placed in the same room, do one of the following: •...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 6. Click the ADVANCED tab. The ADVANCED Home page displays. 7. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router did not obtain an IP address from your Internet service provider (ISP).
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Alternatively, you can configure your computer manually with a DNS address, as explained in the documentation for your computer. • The router might not be configured as the default gateway on your computer.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 7. If you cannot connect after several minutes, the router might be set up with an incorrect service name, user name, or password, or your ISP might be experiencing a provisioning problem.
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Test the LAN path to your router You can ping the router from your computer to verify that the LAN path to your router is set up correctly.
Page 191
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 To test the path from your computer to a remote device: 1. From the Windows toolbar, click the Start button and select Run. 2. In the Windows Run window, type: ping -n 10 <IP address>...
SXR80) and the Orbi Pro WiFi 6 satellite (model SXS80). You can return the Orbi Pro WiFi 6 router or satellite to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router or satellite for at least seven seconds.
Page 194
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Table 5. Factory default settings for the router (Continued) Feature Default Setting LAN 1 DHCP starting IP address 192.168.1.2 LAN 1 DHCP ending IP address 192.168.1.254...
Page 195
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Table 5. Factory default settings for the router (Continued) Feature Default Setting LAN 5 DHCP range 192.168.50.2 to 192.168.50.254 LAN 5 DHCP starting IP address 192.168.50.2...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Factory settings for Orbi Pro WiFi 6 satellite model SXS80 The satellite has the same factory settings as the router. The following table shows the default satellite web interface login settings.
Page 197
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Table 7. Technical specifications for the router (Continued) Feature Description 1 Ethernet WAN port with an RJ-45 receptacle. The port supports 10BASE-T, 100BASE-TX, 1000BASE-T, and 2.5GBASE-T...
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Technical specifications for Orbi Pro WiFi 6 satellite model SXS80 The following table shows the technical specifications for the satellite. Table 8. Technical specifications for the router...
Page 199
Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80 Table 8. Technical specifications for the router (Continued) Feature Description Operating frequency range 5 GHz (EU) 5.18 GHz–5.24 GHz 5.26 GHz–5.32 GHz 5.5 GHz-5.7 GHz 802.11 security...