Power Cable Set (Fru P/N: 5315036 For P3 And P/N: 5388845 For P3 Bt); Tools; Fru Bom; Needed Manpower - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
Section 8-13 Power Cable Set (FRU P/N: 5315036 for P3 and P/N: 5388845 for
P3 BT)
8-13-0-1

Tools

• Common Phillips screwdrivers
8-13-0-2

FRU BOM

This FRU Kit P/N:5315036 consists of following parts.
Note: This individual cables are not seperate FRUs, but are part of cable kit higher level FRU.
Table 8-3 LOGIQ P3 (5315036)
Part Number
5270783
5262720
5262046
5269059
5269791
5269919
5270870
5269067
5263747
5263844
Table 8-4 LOGIQ P3 BT10 (5388845)
Part Number
5342775
5342780
5342888
5366298
5269919
5270870
5269067
5263844
5342783
5390435
5342782
8-13-0-3

Needed Manpower

• 1 persons, 15 minutes per cable
8-13-0-4

Preparations

• Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-13-0-5

Removal Procedure

1. Remove the covers and parts as applicable. Refer to the applicable section of this document.
2. Unplug the power cable from both the ends.
PROPRIETARY TO GE
8
EVISION
Cable Assembly for Transformer to PS, SSR and Peripheral Connector
Cable Assembly for Panel mount connector to power supply & solid state relay
Peripheral Connector to Rear panel sockets
PDB to Conn Brd and MST Brd
Dual SATA Power Cable for PDB to HDD and DVD
Docking Brd to RP2 FRC cable
MST to KBD & DVD SATA Signal cable
Cable Assembly: 1 Power entry to PS, Relay and Printer
Power Assembly to Power supply and Relay Card_Cable assembly
PDB to Conn Brd, MST Brd and RP2 BRD_Cable Assembly
Dual SATA Power Cable for PDB to HDD and DVD
MST to KBD & DVD SATA Signal cable
POWER_SUPPLY_FAN_CABLE_ASSEMBLY
Cable assembly: 4 PDB to SBV board
Chapter 8 Replacement Procedures
Description
LCD Power cable
PDB to KBD and Fan
Conn Brd to TXB
Description
LCD DC Power cable
PDB to KBD and Fan
Conn Brd to TXB
Power Supply output to PDB
LOGIQ P3 S M
ERVICE ANUAL
8-89