Reset The P3 Key To Customer's Functionality - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
7-4-3 Capturing a Screen
6.) A Save dialog box will be opened. Choose d:\export folder as the archive location to save the
After capture the snapshot of the screen to the "clipboard" and save it to the hard disk or other
NOTICE
media, it is not full screen image on the hard disk or media.
7-4-4

Reset the P3 Key to Customer's Functionality

If the customer had programmed the P3 Key to a function other than screen capture, restore that
functionality recorded in
1.) Click Utility on the keyboard.
2.) Select Connectivity from the Utilities Menu.
3.) Select the Buttons tab on the Connectivity screen.
4.) In the Physical Print Button field, select Print3.
5.) In the Destinations list, select the service(s) recorded in
6.) In the Physical Print Buttons section, select the parameters related to the service recorded in
7-8
PROPRIETARY TO GE
8
EVISION
(cont'd)
Figure 7-5 Save Dialog Box
image on the hard disk or DVD-R.
section 7-4-1 on page
step 6, Section 7-4-1.
Section 7-4 - Screen Captures
7-6. Refer to Figure
Figure 7-6
LOGIQ P3 S
ERVICE
7-2.
step 5, Section 7-4-1.
M
ANUAL