Makita BHR261 Technical Information page 6

R
epair
[3] DISASSEMBLY/ ASSEMBLY
[3] -2. Drill chuck assembly for BHR261T
DISASSEMBLING
Drill chuck assembly can be disassembled as illustrated in Figs. 10 to 14.
Fig. 10
1R003
1R212
Ring
spring 21
After Removing Ring spring 21, strike Drill chuck assembly against
workbench which is covered with cloth as a cushion.
Flat washer 24, Leaf spring and Steel ball 5.0 can be removed.
Fig. 12
Spacer
Steel
Ball 6 (2pcs.)
Chuck
holder
Remove Spacer and
Steel balls 6.
Steel ball 5.0
Leaf spring
Flat washer 24
Fig. 13
M6x22 Flat
head screw
Holding Chuck holder's Flat portion in
vise, remove M6x22 Flat head screw
by turning clockwise using Impact
driver.
Fig. 11
Torsion spring 31
Change ring
Pull off Change cover.
Change ring and Torsion spring 31
can be removed.
Fig. 14
Hex wrench 10
Chuck
holder
Holding Chuck holder's flat portion
with vise, separate Drill chuck from
chuck holder by turning counterclock-
wise using Hex wrench 10.
P 6/ 21
Spacer
Chuck holder
Change cover
Chuck
holder