Makita BHR261 Technical Information page 21

W
iring diagram
Fig. D-3
Lead wire (yellow) between Terminal and Connector
Terminal
Refer to "Circuit diagram" and
connect Lead wires to Terminal
as designated by a circle.
Do not face these lead wires to
Terminal side.
(Face them to Yoke side.)
Do not pinch them between Rib
and Housing.
Fix Lead wires (red, black)
of Brush holder complete
with Lead wire holders.
Rib Tube
Fix Lead wires (red, black)
of Brush holder complete
with Lead wire holder.
Connector
Lead wrie (black)
Yoke
Lead wire holder FET
P 21/ 21
Lead wire holder
Light circuit
Rib
Connector
Put Connector
into the space.