Makita BHR261 Technical Information page 17

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-8. Swash bering 10, Gear portions
DISASSEMBLING
Note: Be sure to apply Makita grease RB No.00 and Molybdenum disulfide lubricant to the specific portions shown in
Fig. 1, 2 and 3.
1) Assemble Guide plate and Piston joint to Piston cylinder. (Fig. 52)
2) Insert a emboss of Inner housing complete to Compression spring 14 to keep Compression spring 14 upright.
(Figs. 3 and 53)
3) Pass pole of Swash spring 10 throgh hole of Piston joint, then mount Swash bearing portion into Inner housing complete.
Secure Swash bearing portion by fixing Bearing retainer B to Inner housing complete with two M4x12 Hex socket head
bolts. (Fig. 54)
Note: Be sure to apply adheisves to the threads of the two M4x12 Hex socket head bolts.
4) Insert Change plate into groove of Clutch cam then secure Inner support complete with two M4x25 Hex socket head bolts.
(Fig. 55)
Fig. 52
Piston cylinder Piston joint
Fig. 55
M4x12 Hex socket head
bolts (2pcs.)
Threadlocker type
Bearing retainer B
Inner housing complete
Fig. 56
Change plate
Groove of Clutch cam
Clutch cam
Fig. 53
Compression spring 14
Inner
housing
Guide plate
complete
Swash bearing
portion
P 17/ 21
Piston cylinder
portion
Inner support
complete