Dynamically Updating The Show Interfaces Command (Cli/Menu) - HP Aruba JL253A Management And Configuration Manual

brief
Lists the current operating status for all ports on the switch.
config
Lists a subset of configuration data for all ports on the switch; that is, for each port, the display shows whether
the port is enabled, the operating mode, and whether it is configured for flow control.
<port-list>
Shows a summary of network traffic handled by the specified ports.
The show interfaces brief command listing
switch(config)# show interfaces brief
Status and Counters - Port Status
Port Type
----- --------- + --------- ------- ------ ----------
B1 100/1000T | No
B2 100/1000T | No
B3 100/1000T | No
B4 100/1000T | No
B5 100/1000T | No
B6 100/1000T | No
The show interfaces config command listing
switch(config)# show interfaces config
Port Settings
Port Type
----- --------- + ------- ------------ --------- ----
B1 100/1000T | Yes
B2 100/1000T | Yes
B3 100/1000T | Yes
B4 100/1000T | Yes
B5 100/1000T | Yes
B6 100/1000T | Yes

Dynamically updating the show interfaces command (CLI/Menu)

Syntax:
show interfaces display
Uses the display option to initiate the dynamic update of the show interfaces command, with the output
being the same as the show interfaces command.
NOTE: Select Back to exit the display.
Example:
switch# show interfaces display
72
| Intrusion
| Alert Enabled Status Mode
Yes
Yes
Yes
Yes
Yes
Yes
| Enabled Mode
Auto-10-100
Auto
Auto
Auto
Auto
Auto
Down Auto-10-100 Auto
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Down 1000FDx
Flow Ctrl MDI
Disable Auto
Disable Auto
Disable Auto
Disable Auto
Disable Auto
Disable Auto
Aruba 2930F / 2930M Management and Configuration Guide
MDI Flow Bcast
Mode Ctrl Limit
----- ----- ------
off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
Auto off 0
for ArubaOS-Switch 16.08