Table of Contents
Advertisement
no allow-v1–modules
Figure 49: Disabling compatibility mode
Port status
You can view port status using either the CLI or the menu.
show interfaces brief
Syntax
show interfaces brief
Description
View the port status.
Accessing port and trunk group statistics
Use the CLI to view port counter summary reports, and to view detailed traffic summary for specific ports.
Trunk bandwidth utilization
•
Trunk interface counters display the accumulated statistics over the trunk members' ports since the time they
are added into trunk.
•
Bandwidth utilization for trunks is calculated by averaging the value of the sum of bandwidth utilization for each
trunk member in the last 5 minute interval .
show interfaces
Syntax
show interfaces [brief | config | <PORT-LIST>]
Description
Shows interface information for ports or trunk groups in brief or configuration detail.
Command context
operator or manager
Parameters
brief
Shows the current operating status for all ports or trunk groups on the switch in brief detail.
config
Shows the configuration data for all ports or trunk groups on the switch.
<PORT-LIST>
Specifies the list of ports for which status information will be shown.
Chapter 12 Monitoring and Analyzing Switch Operation
393
Advertisement
Table of Contents
Troubleshooting
