Tis System Faults; System Off; No Data Received; Transponder Not Reporting Altitude - Honeywell BENDIX/KING KMD 550 Pilot's Manual Addendum

TIS SYSTEM FAULTS

SYSTEM OFF

If the TIS system is set to the
OFF position, Figure 29 will
be displayed.

NO DATA RECEIVED

If the KMD 550/850 is not
receiving data from the TIS
receiver then Figure 30 will
be displayed. This could indi-
cate that power is not being
provided to the TIS receiver
(e.g. a pulled breaker), the
TIS receiver is turned off, a
bad wiring
between the display and the
receiver, or a failed TIS
receiver.
TRANSPONDER IS
NOT REPORTING
ALTITUDE
If the transponder's altitude
source has failed or the
transponder is put into a non-
altitude reporting mode,
Figure 31 will be displayed.
Rev 3 Jun/2004
connection
Figure 29
Figure 30
Figure 31
22
KMD 550/850 Traffic Addendum