Tcas/Tas; Tcas/Tas Normal Operation - Honeywell BENDIX/KING KMD 550 Pilot's Manual Addendum

TCAS/TAS

This section applies to TCAS I, TCAS II and TAS systems.

TCAS/TAS NORMAL OPERATION

The following illustration defines the data that appears on the TCAS/TAS
Traffic Display Page:
5
4
3
2
1 Display Range - RNG:##nm
2 TAS (TCAS) Operating Mode - TAS (TCAS) TST, TAS (TCAS) SBY,
TA Only, TA/RA or TAS (TCAS) Fail
3 Available Functions - Displays icons representing data available (black)
and displayed (color)
4 Current Flight Level - FL:###
5 Altitude Volume - NORMAL, ABOVE, BELOW or UNRESTRICTED (not
available in all configurations)
6 Traffic Intruder Symbols - Indicates type of traffic, altitude of traffic and
vertical trend of traffic.
7 "No Bearing" Intruder Dispay Area - AA #.#NM ±XX¤ (Where AA is TA
or RA)
8 Range Rings - Outer ring radius is selected range, inner ring radius is
always two nautical miles
9 Outer Knob Icon - Shows current knob selection
10 Aircraft Symbol - Stylized airplane indicating aircraft position
Rev 2 Nov/2002
To display the TCAS/TAS traffic page press the TRFC
function select key.
1
6
10
3
KMD 550/850 Traffic Addendum
7
8
9