[Cm02] Setting Of System Clock/Reading Out Of Daylight Saving Time - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
02
FUNCTION:
This command is used to assign system clock data (year, date and time). And this command is used to
read out of the daylight saving time.
PRECAUTION:
The system clock starts when
ASSIGNMENT PROCEDURE:
(1) Setting of System Clock
ST + 02 + DE
(2) Reading out of Daylight Saving Time
ST + 02 + DE
SETTING OF SYSTEM CLOCK/READING OUT OF DAYLIGHT
SAVING TIME
is pressed.
EXE
1ST DATA
+ + DE +
(0-2)
1ST DATA
+ DE
+ +
(3)
2ND DATA
+ EXE
(4/6 digits)
2ND DATA
– 51 –
CM02
NWA-008844-001 Rev.5.0
91ch3001.fm
DECEMBER/02/2005