[Cmdd02] Maximum Number Of Call Record Assignment - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
DD02
FUNCTION:
This command is used to determine the maximum number of call records when using PN-AP00-B/PN-
AP00-D with MRCA program.
[Series 3300]
PRECAUTION:
(1) The amount of call record number set by CMDD02>0, 1, 2 must not exceed the following number.
No EXPMEM on AP00 (PN-AP00-B) is provided
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
2620
(2) CMDD02>0, 1, 2 are effective after executing CMDD98. Before executing CMDD98, be sure to
print out all of the stored call records. CMDD98 deletes all of the stored call records.
ASSIGNMENT PROCEDURE:
ST + DE
+ DD02
MAXIMUM NUMBER OF CALL RECORD ASSIGNMENT
Amount of Call Records number of CMDD02 1ST data 0, 1, 2
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-CCIS)
1310
1ST DATA
+ DE
+ +
(1 digit)
EXPMEM on AP00 (PN-AP00-B)/
AP00 (PN-AP00-D) is provided
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-CCIS/
Stand-alone)
23580
2ND DATA
+ EXE
(1-5 digits)
– 868 –
CMDD02
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-CCIS)
22270
NWA-008844-001 Rev.5.0
91ch3009.fm
JULY/01/2006