[Cmdd04] Smdr Functions (2) - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
DD04
FUNCTION:
This command is used to assign the Station Message Detail Recording (SMDR) functions when using
PN-AP00-B/PN-AP00-D with MRCA program.
[Series 3300]
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + + DE
DD04
DATA TABLE:
DATA
XX00 Send detail information of C.O./Tie Line outgoing calls to
SMDR terminal 0
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
XX01 Send detail information of outgoing calls excluding C.O./Tie
Line outgoing calls to SMDR terminal 0
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[Series 3500]
XX02 Send detail information of C.O./Tie Line outgoing calls to
SMDR terminal 1
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[Series 3500]
XX03 Send detail information of outgoing calls excluding C.O./Tie
Line outgoing calls to SMDR terminal 1
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
[Series 3500]
XX04 Send detail information of C.O./Tie Line outgoing calls to
SMDR for Centralized billing-CCIS
XX: Service Class No. assigned by CM12 Y=45/CM60 Y=32
SMDR FUNCTIONS (2)
1ST DATA
+ + DE +
(4 digits)
1ST DATA
FUNCTION
2ND DATA
+ EXE
(0/1)
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
– 871 –
CMDD04
: Initial Data
2ND DATA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3009.fm
JULY/01/2006