Example Of Correcting The Data Entry - NEC Univerge NEAX 2000 IPS Command Manual

(2)

Example of correcting the data entry

In STEP 5 in the above (1) example, when
press . Then the state returns to STEP 4.
CE
STEP1: CM10 has been entered and
STEP2: "001" has been entered instead of "000" as intended.
STEP3: "001" has been assigned as the first data after
pressing
STEP4: If
CE
STEP5: Enter "000".
STEP6: Press
If, in Step 11 in the above (1) example, when "302" has been entered instead of "301", press
Then the cursor moves to the position of "2".
STEP1: In Step 11, enter "302" instead of "301" as intended.
STEP2: Press
STEP3: Press digit Key "1".
.
DE
is pressed, the state returns to that of Step 1.
, and assign the correct first data.
DE
←
.
has been pressed after entering "001" by mistake,
DE
has been pressed.
DE
– 18 –
CHAPTER 1 HOW TO USE CAT
CAT OPERATION
10>
10>001
10>001: NONE
10>
10>000
10>000: NONE
10>001: NONE-302
10>001: NONE-30
10>001: NONE-301
NWA-008844-001 Rev.5.0
←
.
91ch1001.fm