[Cm50] Common Route Indial - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
50
FUNCTION:
This command is used to assign LDNs (Listed Directory Numbers) to common route indial lines. When
these numbers are dialed into the system (either on an incoming tie line or an incoming C.O. line set up
for indialing), the call will appear at a specified call identification key on the attendant console.
The system allows digits to be added to or deleted from indialed numbers on a route basis.This com-
mand, in conjunction with CM35 Y=17, allows two extra leading digits to be specified.
The common route indial facility allows up to eight LDNs to be identified. In addition, this command
assigns the access code to be sent to a Voice Message System (VMS) before/after a Mail Box number.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + 50YY + DE
COMMON ROUTE INDIAL
KIND OF DATA
+ +
(1-3 digits)
DATA
DE + +
(1-16 digits)
– 465 –
EXE
NWA-008844-001 Rev.5.0
CM50
91ch3005.fm