Leaf Spring - Makita DHP482 Technical Information

ASSEMBLING
3. Speed change lever
ASSEMBLING
1. Assemble Compression spring 4 (x2) as drawn.
Compression spring 4(x2)
3. Fit Pin on the lever of Speed
change lever into Compression
spring 4 while pushing Speed
change lever ass'y in the direction
of this arrow.
Pin on the lever of
Speed change lever
Gear ass'y
4.

Leaf spring

ASSEMBLING
3－1
2. Push Compression spring 4 with
projection of Speed change lever.
Speed change lever ass'y
Projection of
Speed change lever
1. Assemble Leaf spring as shown below.
Housing L
Leaf spring
Makita Corporation
Hook one roll of the spring to
the notches of Speed change
lever.
3－2
4. Shift Speed change lever in the either direction.
Pin on the lever of
Speed change lever
4－1
Face projection inside.
P 8/ 11
Projection of
Speed change lever