Leaf Spring - Makita DF347D Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Speed change lever assembly
DISASSEMBLING
Refer to Fig. 5.
ASSEMBLING
Do the reverse of the disassembling steps.
Assemble Speed change lever to Gear assembly as drawn in Fig. 5.
Fig. 5
1. Make sure that Compression
springs 4 (2pcs.) are set in place
in Speed change lever ass'y.
Compression
spring 4 (2pcs.)
Speed change lever
ass'y

[3]-4. Leaf spring

ASSEMBLING
Set Leaf spring in place in Housing L. (Fig. 6).
[3]-5. F/R change lever
ASSEMBLING
F/R Change lever can be assembled to Switch as
drawn in Fig. 7.
2. Fit the projection of lever of Gear
assembly into Compression spring 4
in Speed change lever ass'y.
Projection of
lever of Gear
assembly
Fig. 6
Housing L
Leaf spring
Fig. 7
Hook F/R change lever with
the projection of Switch,
and insert the ends of F/R change
lever to the holes of Housing L
and R.
3. Slide Speed change lever to
low gear mode or high gear
mode after assembling.
Low gear mode
High gear mode
Speed change lever ass'y
hook of
F/R change lever
P 4/ 6
projection
of Switch