Assembling; Speed Change Lever Ass'y - Makita HP331D Repair Manual

2.2.3.2. ASSEMBLING

Assemble by reversing the disassembly procedure.

2.2.4. SPEED CHANGE LEVER ASS'Y

2.2.4.1. ASSEMBLING
Assemble by reversing the disassembly procedure.
Compression spring 4 (x2)
Pin on the lever
of Speed change
lever
Gear ass'y
Pin on the lever of
Speed change lever
Figure 20
Speed change lever
ass'y
Projection of Speed
change lever
Figure 21
Projection of
Speed change ever
Figure 22
1. Assemble Compression spring 4 (x2) as drawn.
Note:
Hook one roll of the spring to the notches of Speed
change lever.
2. Fit Pin on the lever of Speed change lever into
Compression spring 4 while pushing Speed change lever
ass'y in the direction of the arrow.
Push Compression spring 4 with projection of Speed
Note:
Hook one roll of the spring to the notches of Speed
change lever.
3.
Shift Speed change lever in the either direction.
October 2015
14 / 18