(12)
(14)
Figure 10
Remove
(11)
Compression spring 4
Figure 11
(11)
Figure 12
Motor
bracket
Figure 13
(1)
(11)
(1)
(12)
(13)
2. Remove Gear ass'y (11), Motor (12) and Speed change
lever (1) from Housing L (14) at a time.
3. Remove Speed change lever ass'y (1) from Gear ass'y
(11).
Note: Be careful not to lose Compression springs 4.
4. Set the speed change lever of Gear ass'y (11) to High
speed mode.
Turn DC Motor (12) counterclockwise to pull it out.
5. Remove Motor bracket by unscrewing two M3x6 Pan
head screws (13) when you replace DC Motor.
October 2015
11 / 18