Cisco Catalyst 9600 Series Hardware Installation Manual page 66

Installing the Switch
Verifying the Switch Chassis Installation
Step 3
Turn on the power supply switches to power up the system. During the power-up sequence, the system performs
a series of bootup diagnostic tests.
What to do next
Additional system diagnostic tests are available. These tests allow you to perform a complete sanity check on
the system prior to inserting the system into your network and to monitor the health of the system while the
system is running.
Tip
When prestaging systems in a nonproduction environment, we recommend that you run all the diagnostic
tests, including the disruptive tests, to prescreen the systems for failures, if any.
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
62