Leds; Fan Tray Leds; Power Supply Modules Leds - Cisco Catalyst 9600 Series Hardware Installation Manual

LEDs

•
•
•
•

Fan Tray LEDs

LED Type
STATUS
LOCATE

Power Supply Modules LEDs

LED Position or Colour
Solid Green
Fan Tray LEDs, on page 97
Power Supply Modules LEDs, on page 97
Supervisor Module LEDs, on page 98
Line Card LEDs, on page 99
LED Position or Color
Off
Green
Amber
Red
Blue
A P P E N D I X
Meaning
Fan tray is not getting any power.
All fans are running and the fan tray is operating
normally.
One fan is not running.
Two or more fans are not running.
Identifies the fan tray receiving the beacon signal.
The fan tray assembly has two blue beacon LEDs, one
on the front panel and one on the rear. The two will
always match each other.
The blue beacon LED on the front panel is also a switch
that you can press, to turn the front and rear blue beacons
on or off. Alternatively, you can turn the blue beacons
on or off through software.
Meaning
Indicates that the power supply module is switched on with outputs
12V main and 12Vstandby available and in regulation.
Cisco Catalyst 9600 Series Switches Hardware Installation Guide
B
97