Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual page 96

ID50 Series Panel - Installation, Commissioning & Configuration Manual
A position on the LCD with
a flashing underline
indicates that a Space text
character has been entered.
6
4
a. 2
_ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz0123456789
" ` ' , . ! ? : ; % = + - * / # $ & @ ^ _ | ( ) < > [ ] { }
b.
1
c.
5
997-263-000-11, Issue 11
January 2010
Text Editing
Note: The following also applies when editing device and
The upper line of the LCD editable text menu displays
an area of twenty (20) characters. A flashing cursor on
the LCD indicates the currently-editable position. To enter
or edit existing text, proceed as follows.
1 To move the cursor within the editable area, press
[blank/existing text
>:Next
[blank/existing text
>:Next <:Previous
[blank/existing text_
>:Next
2 With the flashing character selected/cursor placed in
8
a. Use the '
b. Using the numeric keypad, press '
[blank/existing text
>:Next <:Previous
[blank/xisting text
>:Next <:Previous
3
[blank/_xisting text
>:Next
c. Using the numeric keypad, press '
3 When the text editing is completed, press the '
Note: The LCD will only register a maximum of 20
[Zone Text]
4 Select another zone for text editing or press the '
92
system text.
the ' ' pushbutton to move it to the right or press
6
the ' ' pushbutton to move it to the left.
4
_]
<:Previous u1:Delete
] : Char
u1:Delete u3:Insert
]
<:Previous u1:Delete
the desired position, press the appropriate buttons to
perform one of the following actions:
/ ' buttons to scroll through the
2 8
alphabet in the order indicated at left.
flashing character. All text to the right of the deleted
character will move one space left and a blank
character will be inserted at the end of the line.
] : Char : Done
u1:Delete u3:Insert
] : Char
u1:Delete
<:Previous u1:Delete
at the current position. All text to the right of the inserted
space will move one position right. If the text string now
exceeds 20 characters, the last character will be deleted.
to confirm. The LCD returns to the Zone Text menu.
characters.
Select Zone No __
' ' button to return to the main Commissioning menu.
5
: Char : Done
u3:Insert
: Done
: Char : Done
u3:Insert
' to delete the
1
: Done
u3:Insert
] : Char : Done
u3:Insert
' to add a space
3
' button
5
' or
4