Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual page 46

ID50 Series Panel - Installation, Commissioning & Configuration Manual
6
EN54-2 : 8.2.4 g)
If a fault-routing output is
configured, a fault-routing
output transmission circuit
fault indication must be
provided.
1
or
2 8
6
DISABLEMENT
TEST POWER SUPPLY FAULT
DELAYS ACTIVE
FIRE OUTPUT: FAULT / DISABLED SYSTEM FAULT
FIRE OUTPUT ACTIVE
SOUNDER: FAULT / DISABLED
PLANT ALARM
POWER
FIRE CONTROL O/P: FAULT / DISABLED
PRE- ALARM
SOUNDERS SILENCED
1
or
2
997-263-000-11, Issue 11
January 2010
3 Press the '
[Setup]
> : Change
4 Press '
5.5.1.5 LED 2C Mode
The default function of this LED is PRE-ALARM. This
option allows the LED to be configured as SOUNDERS
SILENCED.
1 From the Setup menu screen, using the numeric
[Setup] Language =
> : Change
2 Press the '
[Setup]
> : Change
3 Press the '
FAULT
[Setup]
EARTH FAULT
> : Change
4 Press '
5.5.1.6 Un-mute
This option is used to control how new alarms un-mute
the internal buzzer, i.e. new alarms occurring in zones
not previously in alarm or for any new device going into
alarm. To set the desired un-mute option:
1 From the Setup menu screen, using the numeric
[Setup] Language =
> : Change
8
2 Press the '
[Setup]
> : Change
' button to toggle the LED function.
6
LED 1H = Fault Output: F/D
' to return to the Setup menu screen. All
4
changes will be saved on exiting.
keypad press the '
1
Options menu. The Language screen is displayed first.
/ ' buttons to step through the Panel
2 8
Options menus until the LED 2C Mode screen is
displayed.
LED 2C = Pre-alarm
' button to toggle the LED function.
6
LED 2C = Sounders Silenced
' to return to the Setup menu screen. All
4
changes will be saved on exiting.
keypad press the '
1
Options menu. The Language screen is displayed first.
/ ' buttons to step through the Panel
2 8
Options menus until the Un-mute screen is displayed.
Un-mute = On new zone alarm
42
: More < : Exit
' button to enter the Panel
English
: More < : Exit
: More < : Exit
: More < : Exit
' button to enter the Panel
English
: More < : Exit
: More < : Exit