Inspecting And Changing Fuses - Honda Amaze 2018 Owner's Manual

Inspecting and Changing Fuses

Blown Fuse
Blown Fuse
Combined
Fuse
Fuse Puller
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Open the cover on the battery + terminal.
3. Check the fuse in the engine compartment
fuse box B.
u
If the fuse is blown, have it replace by a
dealer.
4. Open the fuse box cover in the engine
compartment fuse box A.
5. Check the large fuse in the engine
compartment fuse box A.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
6. Inspect the small fuses in the engine
compartment fuse box A and the vehicle
interior.
u
If there is a blown fuse, remove it with
the fuse puller and replace it with a new
one.
*1 : Models with the keyless access system have an ENGINE
START/STOP button instead of an ignition switch.
uuFusesuInspecting and Changing Fuses
( 0
1Inspecting and Changing Fuses
*1 . Turn
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage.
2 Fuse Locations P. 303
There is a fuse puller on the back of the engine
compartment fuse box cover.
309