Brightness Control - Honda Amaze 2018 Owner's Manual

uuOperating the Switches Around the Steering WheeluBrightness Control

Brightness Control

*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition
switch.
122
When the position lights are turned on and
the ignition switch is in ON
the TRIP knob to adjust instrument panel
brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
TRIP Knob
reaches minimum or maximum. Several
seconds after you have adjusted the
brightness, you will be returned to the
previous screen.
1Brightness Control
( w
*1 , you can use
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
To cancel the reduced instrument panel brightness
when the exterior lights are on, turn the knob to the
right until the brightness display is up to max, the
beeper sounds.
The brightness can be set differently for when the
exterior lights are on, and when they are off.