Opening The Bonnet - Honda Amaze 2018 Owner's Manual

uuMaintenance Under the BonnetuOpening the Bonnet

Opening the Bonnet

Bonnet Release Handle
Pull
Lever
Support Rod
242
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the bonnet release handle under the
driver's side lower outside corner of the
dashboard.
u
The bonnet will pop up slightly.
3. Push the bonnet latch lever (located under
the front edge of the bonnet to the centre)
to the side and raise the bonnet. Once you
have raised the bonnet slightly, you can
release the lever.
4. Remove the support rod from the clamp
Grip
using the grip. Mount the support rod in
the bonnet.
When closing, remove the support rod, and
Clamp
stow it in the clamp, then gently lower the
bonnet. Remove your hand at a height of
approximately 30 cm and let the bonnet close.
1Opening the Bonnet
NOTICE
Do not open the bonnet when the wiper arms are
raised.
The bonnet will strike the wipers, resulting in possible
damage to the bonnet and/or the wipers.
When closing the bonnet, check that the bonnet is
securely latched.
If the bonnet latch lever moves stiffly, or if you can
open the bonnet without lifting the lever, the latch
mechanism should be cleaned and lubricated.
Diesel models
NOTICE
Do not press the engine cover forcibly. This may
damage the engine cover and component parts.