Honda Amaze 2018 Owner's Manual page 290

uuIf a Tyre Goes FlatuChanging a Flat Tyre
■
Replacing the Flat Tyre
288
1. Remove the wheel nuts and flat tyre.
2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the spare tyre.
4. Screw the wheel nuts until they touch the
lips around the mounting holes, then stop
rotating.
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
108 N∙m (11 kgf∙m, 80 lbf∙ft)
1Replacing the Flat Tyre
Do not over tighten the wheel nuts by applying extra
torque using your foot or a pipe.
Models with wheel cover
Align the valve mark on the wheel cover to the tyre
valve on the wheel, then install the wheel cover.
Wheel Cover
Valve Mark