Inspecting And Changing Fuses - Honda Civic 2021 Owner's Manual

uuFusesuInspecting and Changing Fuses

Inspecting and Changing Fuses

Blown Fuse
Combined
Fuse
Fuse Puller
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
598
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a blown fuse, remove it with
the fuse puller and replace it with a new
one.
*1 . Turn
( 0 1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Use the charts to locate the fuse in question and
confirm the specified amperage on the fuse label.
2 Fuse Locations P. 595
Replace fuse with a spare fuse of the same specified
amperage.
There is a fuse puller on the back of the engine
compartment fuse box cover.