Honda Amaze 2018 Owner's Manual page 200

Table of Contents

Advertisement

uuWhen DrivinguStarting the Engine
Starting to Drive
Continuously variable transmission models
1. Keeping your right foot on the brake pedal, release the parking brake. Check that
the parking brake and brake system indicator has gone off.
2 Parking Brake P. 217
2. Put the transmission into
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull
away.
198
Petrol models
3. Turn the ignition switch to START
without depressing the accelerator pedal.
Diesel models
3. Wait until the glow plugs indicator goes off,
then turn the ignition switch to START
without depressing the accelerator pedal.
(
D . Select
(
R when reversing.
1Starting the Engine
e
(
Do not hold the key in START
seconds.
If the engine does not start right away, wait for at
least 30 seconds before trying again.
If the engine starts, but then immediately stops,
(
e
wait at least 30 seconds before repeating step 3
while gently depressing the accelerator pedal.
Release the accelerator pedal once the engine starts.
Diesel models
When the ambient temperature is extremely low, the
engine peak power may be restricted at starting the
engine. This is to help the fuel flow for the normal
engine operation.
Diesel models
NOTICE
For proper lubrication, the engine must not be run
above fast idle speed until the low oil pressure
indicator goes off.
Avoid harsh acceleration or labouring the engine
before the normal operating temperature has been
reached.
e
(
for more than 10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents