Wall Mounting - Honeywell CNI4 Operating And Installation Manual

4 Mechanical Assemblies

4.2.1 Wall Mounting

Where a flat wall surface is available, such as on the side of a building or shed, stainless steel "hangers"
can be utilized. Illustrated below is the rear view of a CNI4 with associated mounting dimensions (in
inches).
Recommended wall and fasteners
Recommended
Wall
Fasteners
Figure 4-1: Wall Mounting Tabs and Dimensions
Brick Wall
Stainless Steel Thread Forming ¼" dia-1.25"length, Screw size 0.25" Min Torque 56
lb.in.
Honeywell
| 9