Disconnecting The Serial Interface Cable - Honeywell CNI4 Operating And Installation Manual

5 Electrical Assemblies

5.5 Disconnecting the serial interface cable

To configure the Cloud Link 4G Modem and the Pulse Accumulator, you need to disconnect the serial
cable interface connecting them. To do this, Disconnect the RS 232 connector connected to the Cloud
Link 4G modem, and then use the USB-to-serial cable (40-6147-kit) to continue with the configuration
process.
Attention: After configuration is complete, remember to resore the original serial interface between the
Pulse Accumulator and the Cloud Link 4G Modem.
Honeywell
| 18