Setting The Date And Time - Cisco MX200 Series User Manual

59 Managing the Settings

Setting the date and time

About time setting
This window lets you specify your
preferred date and time formats, as
well as the time zone.
If you set the Date and Time Mode
to Auto (as has been done in this
example), the system will look for an
NTP server and get date and time
from there.
If you choose to set NTP mode to
Manual (as has been done in this
example), you must specify the NTP
server address to make things work.
D1458217 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20
SX20 Quick Set, MX200, MX300
Produced: November 2013 for TC7.0
All contents © 2010–2013
Cisco Systems, Inc. All rights reserved.