Specifications - Makita TW100D Instruction Manual

ENGLISH (Original instructions)
1-1. Button
1-2. Battery cartridge
2-1. Switch trigger

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
Max. fastening torque
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
3-1. Lamp
4-1. Reversing switch lever
5-1. Socket
Model
Standard bolt
High tensile bolt
Square drive
-1
)
Overall length
Net weight
Rated voltage
) : 88 dB(A)
pA
) : 99 dB(A)
WA
2
) : 8.0 m/s
h
2
ENE036-1
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
ENG905-1
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Impact Wrench
Model No./ Type: TW100D
are of series production and
ENG901-1
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
5-2. Anvil
TW100D
M8 - M12
M6 - M10
9.5 mm
0 - 2,300
0 - 3,000
110 N.m
163 mm
0.95 kg
D.C. 10.8 V
Corporation as the
ENH101-15
responsible