Cisco MDS 9000 Series Configuration Manual page 82

Displaying RADIUS Server Details
The VSA format optionally specifies your SNMPv3 authentication and privacy protocol attributes also as
follows:
shell:roles="roleA roleB..." snmpv3:auth=SHA priv=AES-128
The SNMPv3 authentication protocol options are SHA and MD5. The privacy protocol options are AES-128
and DES. If these options are not specified in the cisco-av-pair attribute on the ACS server, MD5 and DES
are used by default.
Displaying RADIUS Server Details
Use the show radius-server command to display configured RADIUS parameters as shown in the following
example.
Displays Configured RADIUS Information
switch# show radius-server
Global RADIUS shared secret:*******
retransmission count:5
timeout value:10
following RADIUS servers are configured:
Displays Configured RADIUS Server-Group Order
switch# show radius-server groups
total number of groups:4
following RADIUS server groups are configured:
Displaying RADIUS Server Statistics
You can display RADIUS server statistics using the show radius-server statistics command.
You can clear RADIUS server statistics using the clear radius-server statistics 10.1.3.2 command.
Displays RADIUS Server Statistics
switch# show radius-server statistics 10.1.3.2
Server is not monitored
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
64
myradius.cisco.users.com:
available for authentication on port:1812
available for accounting on port:1813
172.22.91.37:
available for authentication on port:1812
available for accounting on port:1813
RADIUS shared secret:******
10.10.0.0:
available for authentication on port:1812
available for accounting on port:1813
RADIUS shared secret:******
group radius:
server: all configured radius servers
group Group1:
server: Server3 on auth-port 1812, acct-port 1813
server: Server5 on auth-port 1812, acct-port 1813
group Group5:
Configuring Security Features on an External AAA Server