Cisco MDS 9000 Series Configuration Manual page 252

Port Security Manual Configuration
Device Connection Request
P1, N1, F3
P1, N4, F5
P5, N1, F5
P3, N3, F4
S1, F10
S2, F11
P4, N4, F5 (auto-learning on)
P4, N4, F5(auto-learning off)
S3, F5 (auto-learning on)
S3, F5 (auto-learning off)
P1, N1, F6 (auto-learning on)
P5, N5, F1 (auto-learning on)
S3, F4 (auto-learning on)
S1, F3 (auto-learning on)
P5, N3, F3
P7, N3, F9
Port Security Manual Configuration
To configure port security on any switch in the Cisco MDS 9000 Family, follow these steps:
Procedure
Step 1
Identify the WWN of the ports that need to be secured.
Step 2 Secure the fWWN to an authorized nWWN or pWWN.
Step 3
Activate the port security database.
Step 4 Verify your configuration.
Example
This section includes the following topics:
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
234
Authorization Condition Reason
Permitted 5 Wildcard match for F3.
Denied 2 P1 is bound to F1.
Denied 2 N1 is only allowed on F2.
Permitted 1 No conflict.
Permitted 1 No conflict.
Denied 7 P10 is bound to F11.
Permitted 3 No conflict.
Denied 4 No match.
Permitted 3 No conflict.
Denied 4 No match.
Denied 2 P1 is bound to F1.
Denied 7 Only P1 and P2 bound to F1.
Denied 7 P3 paired with F4.
Permitted 5 No conflict.
Permitted 6 Wildcard ( * ) match for F3 and N3.
Permitted 6 Wildcard ( * ) match for N3.
Configuring Port Security