Cisco MDS 9000 Series Configuration Manual page 267

Configuring Fibre Channel Common Transport Management Security
Verifying Fibre Channel Common Transport Management
Security
The show fc-management database command displays the configured FC-CT management security feature
information, see the following example.
Displays the Contents of the Fibre Channel Common Transport Query
switch# show fc-management database
--------------------------------------------------------------
VSAN PWWN FC-CT Permissions per FC services
--------------------------------------------------------------
1 01:01:01:01:01:01:01:01 Zone(RW), Unzoned-NS(RW), FCS(RW), FDMI(RW)
1 02:02:02:02:02:02:02:02 Zone(R), Unzoned-NS(R), FCS(R), FDMI(R)
1 03:03:03:03:03:03:03:03 Zone(W), Unzoned-NS(W), FCS(W), FDMI(W)
--------------------------------------------------------------
Total 3 entries
switch#
To verify the if the FC-management security feature is enabled or not, use the show fc-management
status command:
switch# show fc-management status
Mgmt Security Disabled
Default Settings
The following table lists the default settings for the FC management security feature in a Cisco MDS 9000
Family switch.
Table 24: Default FC Management Settings
Parameters
FC-management
Default
Disabled
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
Verifying Fibre Channel Common Transport Management Security
249