Table of Contents
Advertisement
Taking Blood Oxygen
1. If the monitor prompts you to take your Blood Oxygen reading, press the power button on top of the
oximeter as shown:
2. Place the oximeter on your middle finger with the display on top and keep it there until a reading is
acquired. A screen similar to the following appears:
Note:
Open the finger sensor by gently squeezing it the same way you would open a clothespin.
As the oximeter is searching for a reading, a screen similar to the following appears:
4/3/14
P4815EN.05
©
2014 Honeywell HomMed. All rights reserved.
Taking Vital Signs
9
Advertisement
Table of Contents
